Heavy work at high speed for Doosan

Premium Content

21 May 2020

Three Doosan excavators have helped demolish and replace a road bridge over a busy railway line in Germany within a tight timescale.

Doosan excavators at German road bridge

Doosan had just 72 hours to complete the bridge project

The contractor, Beller, had exactly 72 hours to complete the work – but it won the race against time with Doosan DX255LC-5, DX340LC-5 and DX380LC-5 excavators.

Beller had bought the excavators from Doosan dealer, Ummenhofer, which is based in Pfullendorf in Baden-Wurttemberg, during the previous two years.

Demolition of the bridge was necessary because strong vibrations caused by the rail traffic had made it so unstable it could no longer be used by heavy vehicles. A future-proof solution could only be created by demolition and new construction.

Apart from the time constraints, Beller had to be particularly careful about a main data line that connects a large part of the region to the internet and runs through the construction site area.

At exactly midnight, rail operations were stopped and approval given to start work. From then on, around the clock, the operation was carried out in shifts. After the railway line was covered, the excavators created a gravel bed protect it and demolition started. Particular attention was also paid to protecting the overhead lines.

With the help of several pulverisers, chisels and grabs, the DX340LC-5 and DX255LC-5 tackled the old foundations and the DX380LC-5 the superstructure. The actual demolition was completed in a short time, and around 800 t of concrete was removed and reused in Beller’s own reprocessing plants.

The spaces left by the foundations being demolished were filled in and compacted. This was extremely important as the foundations go down to a depth of 2 m (6 ft 6 in) below the rail tracks and without this work, the stability of the rails would have been put in question when driving over them with heavy rail vehicles.

The route was opened to traffic again on time after 72 hours. The Doosan excavators also took care of the subsequent earthworks and the loading of the trucks.

Latest News
UK watchdog proposes even higher duty on Chinese excavators
UK trade watchdog the Trade Remedies Authority (TRA) has proposed upping anti-dumping duties on imported Chinese excavators to as much as 80.16%
Volvo CE and Trimble eliminate extra hardware in new excavator tie-up
Volvo Construction Equipment and Trimble have developed a fully integrated excavator machine control system set to be introduced to select machines in Q1 of 2027
FOCUS: The trends and challenges facing the European demolition industry
Europe’s demolition sector continues to evolve as infrastructure investment, urban regeneration and circular economy targets reshape priorities
CONNECT WITH THE TEAM
Neel Madsen
Neel Madsen Editor Tel: +44 (0) 1892 784088 E-mail: [email protected]
Peter Collinson VP Sales Tel: +44 (0) 1892 786220 E-mail: [email protected]
CONNECT WITH SOCIAL MEDIA